Twist the paddle at the rear of the chair to free the tilt angle of the seat pan. Lock by pushing the paddle back in to place.
Rotate this handle clockwise to increase the tension of the seat and back tilt to suit the individual user.
Lift the middle paddle to operate the gas lift. Lifting will increase the chair height. If sitting whilst the lever is lifted the chair height will lower.
Pull this small handle under the seat to adjust the seat slide to your preferred position. Release to lock in position.
ARM PAD ROTATION & SLIDE
Grab the pad and twist left or right and push / pull forward, backward or side-to-side to achieve your desired arm pad position.
LOCKING TILT CONTROL
Lift this paddle to free the tilt angle of the back and seat to your preferred position. To lock in position push the lever back down.
ARM HEIGHT ADJUSTMENT
Press the button on the outside of the armrest and lift the armrest to your preferred position. Release the button to lock the armrest to your preferred height.
ARMREST WIDTH ADJUSTMENT
Turn and loosen the handwheels located under each armrest and pull the armrest away from the seat to your preferred position. Tighten the handwheels to lock the armrests in position.
Lift the headrest upwards to your preferred height and angle if required to provide further neck support.
HEIGHT ADJUSTABLE RATCHET BACKREST
To move the backrest up and down lift until you hit your desired position. The backrest has 7 available settings that are indicated by a small clicking sound. Once the highest setting is surpassed, the backrest will reset to its lowest position.
INFLATABLE LUMBAR SUPPORT
To increase the support to the lumbar area of the chair, squeeze the hand bulb. To deflate, press the small button located near the bulb.
**** NEVER OVERINFLATE *****